Why Crown Molding Installers Do It Better

Many people have the idea that everything that can spruce up your home can be done by them. They would be right about a lot of things but maybe not the crown moldings that are popular in so many ways. Getting crown molding installers to accomplish this will be a step in the right direction for a number of reasons.

This can be tackled by you, the home owner as well, however, there are a lot of precision measurements that must be computed in order to get it right. Look at all of the inside and outside corners and think about what all of them mean. The particular angle for most of them will, of course, be 45 degrees but some of them will be something else, even if they look straight.

Many of the moldings that can be purchased are made from wood. This is a very popular material and most other moldings try to look like wood. This is a fairly expensive material and waste is costly. Making sure of the proper amount will require careful measuring of the entire room and all other rooms this will be installed in.

The plastic type material that is used quite often are polystyrene and PVC. These are very inexpensive and easy to install. The costs make this an effective alternative because any waste generated is not as hard to absorb. Cuts are cleaner and they are definitely lighter weight than wood, however, they also need to be painted because of their uniform white color.

A good material to use, although not wood but can look like it, is polyurethane. It is insect and rot resistant so it is the best to use in any room that is subject to moisture. The critical measurements and the ability to work with angles are still vital.

One of the most expressive and expensive material for this treatment is plaster. Most moldings will present as a run of various lines of contrasting heights. A plaster molding can actually be molded into whatever you want them to be. A line of scroll work or various geometric designs are a few of these. Other options are medallions in each corner that can be extended out into the room. This material makes it possible to bring back some of the craftsman features of older homes.

Getting the measurements right is a hard thing to do the first time. Some of the skills sets you need, if you are going to be doing this yourself, is butt splices and inside and outside angles. Use of a skill and jig saw will also be helpful. A tape measure is always appropriate any time you grab a hammer and saw.

Consider carefully which way you want to go with this. Making your home shine a little better is the goal. Getting it done with the least amount of trouble is a good idea. Having someone do it that has all of the tools, all of the experience and, better yet, enough material to waste, is the best idea.